Dismal failure! - Fly Fishing Forum
>> Archive: Striper (etc) Flies Tricks of the trade

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 02-17-2003, 02:15 PM
Slinger's Avatar
Slinger Slinger is offline
CantAnchorUs
 
Join Date: Jan 2002
Location: Rhode Island
Posts: 733
Dismal failure!

Being snowed in I thought that this might be a perfect time to tie crease flies. I`ve listened to all the raves about them and decided that I needed them in my arsenal. Anyway, never in 30 yrs. of tying has a first attempt at a fly meet with such dismal failure. When I finally ripped the fly from my permanently glued together fingers it looked nothing like the pics I`ve seen of these flies. Now would be the perfect time to pull a bank job, I have no fingerprints! I may never get this CA off! The fly, if it could be called that, looks nothing like a morsel that might attract a finned opponent. The instructions, which were my primary reason for buying the kit, turned out to be meager at best. I will not be defeated, I will persevere. But in the mean time, how do I get this S&%t off me?
Slinger
__________________
Steve
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 02-17-2003, 02:28 PM
broche broche is offline
Registered User
 
Join Date: Jun 2000
Posts: 88
I'm not sure what would safely take that off. I just use soap and water and whatever doesn't come off immediately will fall off with the dead skin.

I know what your talking about in terms of "disasters at the vise". I had one today and it was with a pattern I'm quite familiar with. Even the most basic patterns will end up as abortions (forgive the terminology) if I don't fully concentrate. That's just how it is with me. And new patterns - OOF! I can tie them, but I'm a slow learner!

Only a couple more months to go and we are out there! I always have dreams this time of year!
__________________
broche
Reply With Quote Quick reply to this message
  #3  
Old 02-17-2003, 04:17 PM
John Desjardins John Desjardins is offline
Member
 
Join Date: Feb 2000
Location: Central MA
Posts: 1,839
If you absolutely have to get it off, e.g. glued together fingers or hands,:hehe: acetone or nail polish remover will do it. Other than that I'd let it wear off.

I know about the fly problems. I bought some of Roman Moser's Plushille at a show after seeing a 12 year old tie great looking simple minnows with it. to put it mildly my first attemots with it looked abysmal. Todays problems were with midges. But thats for the trout forum.
__________________
John Desjardins
Reply With Quote Quick reply to this message
  #4  
Old 02-17-2003, 04:29 PM
JDJones's Avatar
JDJones JDJones is offline
JD
 
Join Date: Dec 2001
Location: Rogue River So. Oregon
Posts: 641
CA removal

Z-7 Debonder by Pacer Technology is available at flyshops and hobby shops. It is an acetone base product.
Reply With Quote Quick reply to this message
  #5  
Old 02-17-2003, 04:52 PM
JimW JimW is offline
Registered User
 
Join Date: Feb 2000
Location: As long as it's Salty
Posts: 1,795
Steve, I too have become attached to a crease fly or two:hehe: But that' nothing, listen to this one, true story too.
A few years back at a show one of the guys in tiers row used the slow cure ca (the pink bottle) with a spray accelerant. You think you've go problems now:eyecrazy: This guy puts the CA glue on the threads and shank of the hook, positions the foam just so, gives it a squirt of accelerant and BANG. Holy chit, you'd a thought it was the forth of July. The unamed pro tyer still had his fingers in his mouth as I cautiously mosied on to the next bench.
I only gave the crease flies a try last winter after seeing an albie whack one unintentionally dead drifted (read- untangling knotted line while crease fly drifts in the water) when nothing else could buy a hit. Here's what I've learned. They work great and they are not bad to tie/fabricate. I use CA glue and more recently Goop. I use a spring clamp or clothes pins to keep the foam in place since the goop takes longer to dry. The CA crease flies are lighter than the goop version but both float. Those Berol marking pens and probably sharpies work great for creating color schemes. Just make a few stripes of Olive, chart, yellow, maybe a few purple dots and then a piece of pipe insulating foam to blend the colors. I'm no artist but I find I'm more capable of coloring then trying to glue on mylar. I don't have the kit and I've seriously considered purchasing it but I seem to get by with the markers and walmart foam. I've also switched to rod builders epoxy - flex coat lite for coating the body, has to dry overnight but it does not yellow and goes on super thin.
Reply With Quote Quick reply to this message
  #6  
Old 02-17-2003, 07:24 PM
Slinger's Avatar
Slinger Slinger is offline
CantAnchorUs
 
Join Date: Jan 2002
Location: Rhode Island
Posts: 733
On my fourth try and each one looks worse than the previous, this is starting to piss me off! I may, perish the thought, have to buy some.
Slinger
__________________
Steve
Reply With Quote Quick reply to this message
  #7  
Old 02-18-2003, 12:41 AM
neac9 neac9 is offline
Registered User
 
Join Date: Jan 2002
Location: ri
Posts: 60
Send a message via AIM to neac9 Send a message via Yahoo to neac9
hmmmmmm brings to mind a peliolithic fly I once tied
well would love to see the fly that took down the mighty steve
bring by your failures
besides, I know your just being to hard on yourself
Reply With Quote Quick reply to this message
  #8  
Old 02-18-2003, 06:37 AM
flyfisha1's Avatar
flyfisha1 flyfisha1 is offline
Marine Scientist
 
Join Date: May 2002
Location: NYC, South Jersey, Eastern PA
Posts: 1,080
Slinger...

... I figured I'd try to tie some crease flies after seeing them in a local store for the bargain price of $6 each ("do you have a layaway program here?"). Saw the kit on line for $20 and couldn't bring myself to buy it. Went to a local craft shop and picked up some cheap sticky-backed white foam, found the instructions on line, and tied a few up. I had a similar issue with liquid cyano getting on my fingers, but then went with a gel cyano which was "easier to avoid" and still worked quite well. I either color the foam with sharpies or use prismatic tape to give the body color, then apply the eyes, and finally coat it with thin Soft Body before putting it on the drying wheel.
The idea of using a clothespin to keep the body clamped together during the curing process is a good one, I'll have to try that. Also, using a rod finish like Gudebrod one-step is an interesting idea.
I'll attach a photo of one of my creations in a few minutes...
Reply With Quote Quick reply to this message
  #9  
Old 02-18-2003, 10:05 PM
DMJ DMJ is offline
Recent Member
 
Join Date: Dec 2002
Location: Kennebec River&So.Maine
Posts: 6
If you're having problems getting CA glue on your fingers try folding a piece of waxed paper over the foam [between your fingers and the foam] and then applying the CA. The CA will not adhere to waxed paper.

Don
Reply With Quote Quick reply to this message
  #10  
Old 02-19-2003, 12:09 AM
Slinger's Avatar
Slinger Slinger is offline
CantAnchorUs
 
Join Date: Jan 2002
Location: Rhode Island
Posts: 733
DMJ that sounds like a great idea, I`ll give it a try, and Jim W`s idea of using Goop, I like that one.
Slinger
__________________
Steve
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Steelhead Failure on the Islands East Coast North Island Pacific Northwest Sea Run Forum 46 10-12-2004 08:52 PM
Dismal Failure joe wojtan >> Archive: Striper (etc) Flies 3 02-20-2003 08:47 PM
Flyline Failure artb Gear Talk - Fly Stuff Spoken Here 14 11-19-2002 12:27 AM


All times are GMT -5. The time now is 09:19 AM.



Copyright Flyfishingforum.com (All Rights Reserved)