String Leach - Fly Fishing Forum
>> Archive: Salmon & Steelhead Flies Spey flies to mixed wings, new innovations

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 12-19-2007, 03:47 PM
Charlie's Avatar
Charlie Charlie is offline
Moderator
 
Join Date: Oct 2003
Location: Eastern Great Lakes & Gaspe
Posts: 1,003
String Leach

A few people have been asking for tying instructions for a string leach so I decided to take a crack at it and do a tutorial on how I tie them. Keep in mind that this is not the only way and there are other good ways to tie them, but this is the one that I like to do.

Start by cutting a strip of rabbit fir to a length of about an inch shorter than you want the fly to be. In this case about 5 inches. I like to use magnum cut rabbit strips since they are a bit fuller than the regular ones and we are tying a rather large fly.



Next, secure a small section of micro tubing in your vice. Split the rabbit fir on the strip approximately one and one half inches from the front of the strip, lay it on top of the tube and tie it down. Secure the thread with a whip finish and apply some head cement.




Remove the tube from the vise and trim the tube on both sides close to the tie in point.



Repeat this process about one and one half inches from the first tube.



Next, snell a hook to about ten inches of some dark colored line. In this case I used an octopus hook and 50lb. gel spun line.



Thread the line through the tubes on the rabbit strip.



Next, rotate the head of your vise about 90 degrees and secure a Waddington shank in your vise (I like to use the 20mm size for this type of fly). Secure the turned down eye of the shank in the jaws of the vise.


__________________
Release-em-Alive!
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 12-19-2007, 03:48 PM
Charlie's Avatar
Charlie Charlie is offline
Moderator
 
Join Date: Oct 2003
Location: Eastern Great Lakes & Gaspe
Posts: 1,003
Thread the line with the snelled hook through the turned down eye and secure it to the bottom of the shank with the hook extending about five inches back past the rear eye of the Waddington shank.




Thread the remainder of the line through the front eye of the shank, fold it back on top of the shank, bind it down and trim off the excess.



Next, secure the front end of the rabbit strip to the back of the Waddington shank (at this point you can tie in some type of flash if you like).



Tie in some lead eyes to the front of the shank on the bottom side.



Tie another rabbit fur strip to the back of the shank, wind it foreword and tie it off.




At this point you can finish the head and the fly is complete.

__________________
Release-em-Alive!
Reply With Quote Quick reply to this message
  #3  
Old 12-20-2007, 11:19 PM
chromedome chromedome is offline
chromedome
 
Join Date: Feb 2005
Location: NIAGARA
Posts: 140
Smile

On Time!! Very nice Charlie. This is one that I've just recently gotten into myself and have been looking at various ways to tie it. I like your method and will be trying to tie some up by your method.
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Quick tie/ hook change String Leach speydoc >> Archive: Salmon & Steelhead Flies 12 01-05-2005 05:29 PM
String leeches: one hook or two? Nooksack Mac >> Archive: Salmon & Steelhead Flies 5 12-24-2004 08:36 AM
String leach intruder speydoc >> Archive: Salmon & Steelhead Flies 10 12-15-2004 07:50 AM
Sounds like a leach to me hindus >> Archive: Favorite Trout Flies 0 04-03-2003 08:42 PM
Broken string Slinger Stripers and Coastal Gamefish 3 03-31-2003 05:50 AM


All times are GMT -5. The time now is 01:41 AM.



Copyright Flyfishingforum.com (All Rights Reserved)