Gel spun vs. Dacron backing - Fly Fishing Forum
Gear Talk - Fly Stuff Spoken Here Sage advice & fresh perspectives

Thread Tools Search this Thread Rating: Thread Rating: 1 votes, 5.00 average. Display Modes
Old 05-21-2005, 06:10 PM
8xmidge 8xmidge is offline
Registered User
Join Date: May 2005
Location: Ozarks
Posts: 9
Gel spun vs. Dacron backing

I have a backing questions for everyone. I have a Teton Tioga Magnum 8 that I currently use for freshwater bass and carp, but would like to plan a bonefish trip in the near future. The reel is about maxed out with 100yds of 30# SA dacron
backing and 8wt line. How much extra capacity would I get if I switched to gel spun? Also, do I need 30# for bones or would 20# be OK?

Reply With Quote Quick reply to this message
Sponsored Links
Old 05-21-2005, 07:53 PM
FLGator FLGator is offline
Registered User
Join Date: Jan 2004
Location: NW USA
Posts: 197
You would get "a lot" more backing with GSP. Sorry, I can't quantify what that actually means. However, I have over 300 yds of 50# GSP on my Abel 3Ns.

Here's the kicker, I wouldn't spool any of my reels with GSP again with one exception. The exception would be fishing for blue water species and it would be only to minimize line drag through the water to keep the tippet from breaking.

I find GSP to be extremely un friendly. You have to really be careful with wet fingers and taught backing. It's really sharp and will cut the snot out of you if you are not careful. Also, the best knot I have found to go from backing to fly line is the double bimini which can be a bit tricky to learn.

My recommendation is to do some research and find out which 20# backing has the smallest diameter and then try and get 200 yds on your reel. Twenty pound is heavy enough for any bonefish that swims and you will be much happier in my opinion with the dacron.

Reply With Quote Quick reply to this message
Old 05-21-2005, 10:57 PM
Salmon Chaser's Avatar
Salmon Chaser Salmon Chaser is offline
Spey'd and lovin it!!!
Join Date: Jan 2004
Location: Wherever Salar swims!!!
Posts: 115
If we can land large Atlantic Salmon, Steelhead,etc on 6lb test leader,,, WHY do you need 30lb, or even 25lb backing on a reel?? If a fish takes off with 10' leader, 90'-120' of fly line, do you think that the tension will be enough to break the backing??? No!
200 yds of 18lb backing and a full line is more than enough. IMO
Salmon Chaser

A second thought,,, would gel spun when wound back tightly to the reel have the ability to crack the arbor as would mono??
Professional Salmon Chaser since 1988!!!
"Well, this is called patience by those who don't know. But it is nothing at all like patience. It is hope, undying, unquenchable, the heart and soul of salmon fishing".
Letters to a Salmon Fisher's Sons
Reply With Quote Quick reply to this message
Old 05-21-2005, 11:12 PM
stonefly1013 stonefly1013 is offline
Registered User
Join Date: May 2005
Location: michigan
Posts: 13
Arrow s.c. i have to agree

i have to agree with s.c. the reason for this you do not need that much force to stop a fish not even a big bone fish. this is why i always pre set my drag at 20% of the breaking strength of the smallest tippet. i.e. 2 pounds of drag for a 10 pound tippet that stiped from the reel with a spring scale not tested throught the guides.the guides add drag presher over the 9 foot etc.. lengths wich cause more resistance. if you check you other post i wrote the same thing.

good luck and tight lines and a bunch of time on the water stonefly1013........
Reply With Quote Quick reply to this message
Old 05-22-2005, 06:19 AM
josko josko is offline
Registered User
Join Date: Jan 2000
Location: Cape Cod
Posts: 568
I am a big fan of GSP backing, but I normally use 'regular' GSP fishing line, such as Spectron or Powerpro over the more expensive, and IMHO inferior GSP sold as fly line backing. Some if these lines, such as Fireline or Stren, are made for maximum strength, and will cut like a bandsaw. They don't have a use on fly reels. Spectron and Jerry Brown are thicker (for a given strength) and designed to minimize burying and abrasiveness. If one's worried about getting cut by GSP, Spectron would be a good choice. Airflo makes (or used to make) a flat GSP backing line, which looked like a tiny tape. This stuff wanted to lie flat so it would not cut or bury, but it generated lots of drag in the water (you guessed it) since it wanted to move flat through the water.
While pelagic fishing, one should have a stripping glove handy for linefeeding GSP back on the spool. For bonefishing, c'mon.

I think backing should have a higher breaking strength than the fly line, just so the leader snaps first. Again, not so much of an issue with bonefishing but a good rule of thumb to follow. Besides, 20# GSP will cut and bury that much worse. Also, abrasion resistance of GSP under tension is very poor. This was demonstrated to me by stretching some 80# GSP at 20# tension, and then dropping a razor blade on it. Just a box cutter razor blade, by itself, dropping from less than 1', will easily cut 80# GSP.

Finally, my dacron seems to rot, i.e. becomes very easy to break after a couple of years on the spool, and I'had continual issues with mold growing on it.

I used to think 150 yds was enough backing for bonefishing, but this last trip had me sprinting across a shin-deep flat with 'bout six wraps of backing on the reel. It's 200 yds for me from now on.
Reply With Quote Quick reply to this message
Old 05-22-2005, 08:28 PM
Eddie Eddie is offline
Registered User
Join Date: Mar 2000
Location: Portland, ME.
Posts: 1,586
there are many threads discussing this on this web site. Do a search.
I am not a big fan of trying to make a small reel "big" with gel spun. You usually wind up with a very small arbor, and for bones, I like a rapid retrieve.
I am not a big fan of 20# gsp, because it tends to bury into it's self if you are not careful. Fifty is stronger than your fly line, and what I prefer.
As for the "dangers"....I am not convinced. You would have to do something unbelievably stupid to hurt your self with gsp. I have been using it for close to ten years, and I can't even think of a scienerio that would lead to an injury. But you never know when Darwin will show up.
Do a search.
One cast can change your day...maybe your life.
Reply With Quote Quick reply to this message
Old 05-23-2005, 07:43 PM
zugbugz's Avatar
zugbugz zugbugz is offline
Registered User
Join Date: Nov 2004
Location: Mogollon Rim and White Mountains of Arizona
Posts: 73

I can't prove this (yet), but I've heard Cortland has some of the smallest diameter 20lb dacron backing around. Might be worth checking into...

Reply With Quote Quick reply to this message

Quick Reply

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Home Waters
Your home waters
Current Favorite Fly
If you only had one... (change anytime)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
20 lbs dacron vs 35lbs gel spun? boatdrinks Bonefish, Tarpon, and other Obsessions 16 04-06-2012 12:57 PM
gel spun backing? SteelBoneguy Bonefish, Tarpon, and other Obsessions 3 02-01-2006 09:40 AM
Gel-spun Backing? craig Bluewater Extreme 8 08-05-2003 07:56 AM
Gel-Spun Backing JErwin Gear Talk - Fly Stuff Spoken Here 8 04-07-2003 06:27 PM

All times are GMT -5. The time now is 08:58 PM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright (All Rights Reserved)