Rotary Vise Questions - Fly Fishing Forum
Worldwide Flyfishing Discussion Talk flyfishing with members around the world!

Thread Tools Search this Thread Rate Thread Display Modes
Old 02-06-2001, 12:54 PM
John Desjardins John Desjardins is offline
Join Date: Feb 2000
Location: Central MA
Posts: 1,839
Rotary Vise Questions

I broke down last weekend and bought a Renzetti traveller last weekend to replace a cheap, worn out, vise. When tying with it I realized that I need to rethink how I tie to take advantage of the rotary feature. My questions are:

What do I do with the bobbin rest? I hit it on every wrap of thread until I took it off.

Besides inspecting the back side of a fly, what steps should I use the rotary feature for?

Any tips for increasing tying productivity?

Thanks in advance for the assistance.
John Desjardins
Reply With Quote Quick reply to this message
Sponsored Links
Old 02-06-2001, 01:16 PM
Hawkeye's Avatar
Hawkeye Hawkeye is offline
Registered User
Join Date: Jan 2000
Location: South Shore Mass.
Posts: 1,053
RE:Rotary Vise Questions

I just got a rotary vise - Danvise so I am far from an expert.

The bobbin rest should be able to be pushed out of the way when not in use. I use the rotary feature to help me more evenly attach materials, to apply epoxy and other stuff more easily, and to wrap materials like chenile and dubbing.

I love it!
Tight Lines,

Reply With Quote Quick reply to this message
Old 02-06-2001, 04:40 PM
Bob Pink Bob Pink is offline
Active Member
Join Date: Jan 2000
Location: Massachusetts
Posts: 473
RE:Rotary Vise Questions

I'm sure there are a number of other functions but..
The bobbin rest is best used when you are palmering hackle or zonker and/or wrapping material on the hook shank like dubbing, body braid or tinsel. The key it to have the shank of the hook on the same centerline as the axis of the vise, then position the bobbin rest so that the thread tracks right at the eye of the hook.
Some tiers will use the rotary function when applying the threads to the hook but I find it's faster to rotate the bobbin tip.
As Greg says, just swing it back 90* when you don't need it. Never in the way back there.
Other functions;
It's often easier to build a lower wing/body of a fly with the hook inverted, doing a high/low tie on a fly you are always reversing position.
I find it very helpful in matching location when applying eyes.
Building epoxy heads when using quick-dry epoxy
Reply With Quote Quick reply to this message
Old 02-06-2001, 04:41 PM
juro's Avatar
juro juro is offline
Coast2coast Flyfishaholic
Join Date: Jan 2000
Location: Steelhead country|striper coast|bonefish belt
Posts: 20,594
RE:Rotary Vise Questions

[by the time I finished my reply Bob provided a much more concise summary - read this if you have spare time ]

The bobbin rest is very useful if you are doing (for lack of better term) multi-level tying operations. What the heck does that mean?

Let's start with a wolly bugger. Everyone ties 'em sooner or later. It has a palmered hackle over chenille. On a stationary vise, both are wound around and around the hook shaft. The results can be (but not always) uneven and it's not easy to re-wrap to straighten, especially because you want the stem to be against the chenille with the barbs pointing outward with no twisting of the hackle. Wrapping the hand around the hook inherently twists the feather. That's why people make and buy expensive universal hackle pliers that hinge at the union of handle and jaws... to provide the degree of freedom to keep a feather straight during the winding process.

With rotary, you hold the feather in the desired position and turn the fly. It can't twist unless you go out of your way to twist it. I haven't used the universal hackle pliers in years, they don't even make it in my main tying kit anymore. If you screw it up (unevenly wound) on the rotary, you unwind and wrap it again in two seconds.

But that doesn't answer the question... the bobbin holder pivots on the vise shaft, and tilts on it's own shaft axis too. I swing the holder to the front (away from me) while wrapping stuff, and swing it in when I need it to hold the bobbin.

When do you need to hold the bobbin?

Let's go back to the wolly bugger. After tying in the hackle at the front of the fly, you've completed the chenille body by spinning the fly hook while holding the chenille like a lathe bit. Pc of cake. Now, you tie down the end of the chenille using a whip finish, I prefer the matarelli tool, some prefer their fingers. I can do both but the tool is so much easier for me (results may vary).

Swing the bobbin arm closer so it is in-line with the fly shaft, and lay the thread coming from the whipped chenille (near the bend of the hook) onto the arm. Now you can take your hands off everything and grab the hackle that winds over the chenille. Hold it flat against the chenille and turn the rotary vise, laying the feather on the chenille in a spiral toward the tail as the fly spins. The thread and bobbin are held by the arm and thus does not dangle, twist or wrap during this step... because the thread lies in the same axis as the hook while spinning.

Now that the hackle has been wound to the spot where the thread was whipped in place, you can now pick up the bobbin and wrap the feather in place. even if you preferred to tie in the marabou first, the thread and the marabou would be in-line and spinning with each other so would not tangle during the hackle wrap.

Once again, some tie circles around me with a fixed vise. Your results may vary.


Reply With Quote Quick reply to this message
Old 02-06-2001, 05:35 PM
PeteGray PeteGray is offline
Join Date: Oct 2000
Posts: 72
RE:Rotary Vise Questions

You're hooked! Once you break the code you can never go back! Rotary FOREVER!
Reply With Quote Quick reply to this message
Old 02-06-2001, 07:52 PM
GregS GregS is offline
Join Date: Dec 2000
Posts: 58
RE:Rotary Vise Questions

A wooly bugger, interesting choice for a description. It's a great fly, tie some in large sizes 4/0 chartreus is my favorite, but yellow and white also work, and throw them at stripers and blues... You won't be sorry.

Reply With Quote Quick reply to this message
Old 02-06-2001, 09:12 PM
John Desjardins John Desjardins is offline
Join Date: Feb 2000
Location: Central MA
Posts: 1,839
RE:Rotary Vise Questions

Thanks everyone. I guess its time to tie some bead head wooly buggers & experiment. The epoxying & eyes worked great. Lots easier than holding it in my hand which is how I used to do it.
John Desjardins
Reply With Quote Quick reply to this message
Old 02-06-2001, 09:55 PM
FredA's Avatar
FredA FredA is offline
Middle Aged Member
Join Date: Apr 2000
Location: Bicep to elbow
Posts: 1,859
RE:Rotary Vise Questions

I just picked up the Saltwater Traveler myself. Got to admit I like it, especially for keeping track of material distribution. Also, I need all the help I can get. If I were Native American my name would be Ten Thumbs. Too many jambed knuckles from basketballs off the fingertips during my gym rat days.

Fred A.
Reply With Quote Quick reply to this message
Old 02-07-2001, 07:58 AM
striblue's Avatar
striblue striblue is offline
President of CAC
Join Date: Aug 2000
Location: Plymouth and Chatham, MA
Posts: 7,518
RE:Rotary Vise Questions

I started tying about 8 weeks ago and went with the Renzetti traveler and really can not compare it to anything else but I am very satisfied and the rotary feature was the way to go for me... made the learning curve shorter and there is nothing like it for epoxy application.. Also, I was convinced to get the regular traveler instead of the saltwater since I could do trout flies sometime in the future. I have tied 4/0 hooks easily down to size 4 for saltwater... that about covers it for me.
Reply With Quote Quick reply to this message
Old 02-07-2001, 11:12 AM
tomd's Avatar
tomd tomd is offline
Registered User
Join Date: Feb 2000
Location: cape cod, duxbury, and boston harbor
Posts: 834
Send a message via ICQ to tomd
RE:Rotary Vise Questions

I saw Lefty tying wooly buggers on a tape. he called em indestructable wooly buggers. he takes 2 strips of chennile and achors them down with the hackle between them in the hackle pliers, spins it a bit , then winds it up the shank... tada!!! done Tom D
Reply With Quote Quick reply to this message
Old 02-07-2001, 05:07 PM
GregS GregS is offline
Join Date: Dec 2000
Posts: 58
RE:Rotary Vise Questions

With a rotary vise, another method to make the chennile and hackle rope instead of twisting the hackle plier is:
1. anchor chennile and hackle at the tail tie in point
2. wrap your thread to just behind the hook eye and half hitch there and lay thread over bobbin holder
3. grasp the chennile and hackle in hackle pliers and hold them horizontally along the hook shank
4. rotate the vise until you have the desired rope
5. move the rope towards you until it is perpendicular to the hook shank
6. rotate the vise to place chennile and hackle rope onto the hook shank.

This sounds like a lot of detail, but give a try it really moves fast about the second time you do it...

Reply With Quote Quick reply to this message

Quick Reply

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Please enter a password for your user account. Note that passwords are case-sensitive.
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:
Home Waters
Your home waters
Current Favorite Fly
If you only had one... (change anytime)


Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.

Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Similar Threads
Thread Thread Starter Forum Replies Last Post
Nor-vise FrenchCreek For Sale by Owner 7 12-15-2003 02:35 PM
new vise SDHflyfisher Worldwide Flyfishing Discussion 16 05-02-2003 01:32 PM

All times are GMT -5. The time now is 08:59 PM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright (All Rights Reserved)