outboard - Fly Fishing Forum
Propwash A boat is a hole in the water into which you pour... good times!

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 05-10-2003, 01:03 PM
Brad Brad is offline
Registered User
 
Join Date: Nov 2000
Location: Colorado
Posts: 246
outboard

I just took the plunge with an old aluminium boat that needs a new used outboard. Any recommendations on year and make for a 15hp outboard. What can I expect to get for around 750$. If I spend 1000$ will I get a much better outboard?

Thanks
Reply With Quote Quick reply to this message
Sponsored Links
Advertisement
 
  #2  
Old 05-10-2003, 01:58 PM
kjackson kjackson is offline
Registered User
 
Join Date: Jan 2003
Location: Port Townsend
Posts: 142
Hate to say it, but you're better off with a Japanese outboard. Suzukis are great motors as are Yamahas. I know a lot of people stand behind their Hondas. You might also scout around a bit to see if you can find a new Tohatsu or Nissan. I've a hunch their new prices will be a lot lower than you might think.

I would avoid Johnson/Evinrude used motors because of their recent bankruptcy and the problems that led to it. Some of the later motors were of pretty shoddy workmanship, I understand. The only complaints I have about Mercury products, besides their price, is the fact that they can be hard to start in cold weather.

As for the other brands mentioned, make sure you have service available in your area before you buy one of the Japanese motors.

Good luck,

Keith
Reply With Quote Quick reply to this message
  #3  
Old 05-12-2003, 01:40 PM
jfbasser's Avatar
jfbasser jfbasser is offline
Pencil me in.....
 
Join Date: Aug 2002
Location: The Nearside of the Middleside
Posts: 1,070
OMC's problems were related to developing the Fastrike motor and the subsequent models of fuel injected outboards in the 150 to 200 horsepower range. There is absolutely no concern about their smaller engines used or new! In fact they are somewhat preferred. OMC is currently owned by Bombardier.
Reply With Quote Quick reply to this message
  #4  
Old 05-12-2003, 02:33 PM
juro's Avatar
juro juro is offline
Coast2coast Flyfishaholic
 
Join Date: Jan 2000
Location: Steelhead country|striper coast|bonefish belt
Posts: 20,593
Brad,

No one I know puts more hours or harder use on their small motors than the rental boats found on the salmon fishing coastlines of the pacific northwest. Just about all use 15 hp yamis, if that means anything.

Good luck!
Reply With Quote Quick reply to this message
  #5  
Old 05-12-2003, 04:14 PM
kjackson kjackson is offline
Registered User
 
Join Date: Jan 2003
Location: Port Townsend
Posts: 142
Perhaps I should clarify my statement in regards to OMC smaller motors.

Just prior to the bankruptcy, OMC dealers were having some serious problems with both quality control issues and getting parts. I do know that my local marine dealer dropped the Evinrude line because of it. There was some discussion in boating circles about getting parts to repair some of the pre-Bombardier outboards.

Don't get me wrong-- I ran Johnson outboards for about 20 years before switching, and I would buy a 1980- 1990 six horse at the drop of the hat because they were extremely reliable workhorses that run forever. From discussions that I've had with people at Bombardier, I believe the new Johnson/Evinrude models are topnotch. It's the ones in between that I wouldn't trust.

And what Juro says about Yamahas is right on the money. This company has taken over the Honda bracket on the back of many NW boats. It's also the motor of choice for a lot of Alaskan saltwater boats as well. If you can find a Yamaha in your price range that hasn't been abused (you should be able to tell), it will serve you well. I would expect the same for Suzuki, Nissan, and Tohatsu, but there getting service may be a problem if you don't have dealers in your area.

Good luck,

Keith
Reply With Quote Quick reply to this message
  #6  
Old 05-14-2003, 12:13 PM
steelheadmike steelheadmike is offline
Registered User
 
Join Date: Feb 2002
Location: Hudson River, Croton River, Salmon River, CT,RI,MA
Posts: 607
Japanese

I would definately say go with Japanese. Honda, Yamaha, Suzuki and Nissan ( had a 50hp and it was GREAT ) or Tahatsu (Tahatsu makes Nissan ). Look at the dealers in your area as well. Its important to have someone close to work on it when and if something goes wrong. I would not say to over look Mercury either. They have gotten alot better plus you can always find someone to work on it.

In my area its all OMC and Mercury dealers. I have a Honda ( LOVE IT by the way ) but I have to drive an hour to the closest dealer for service and repair. Not exactly convenient but its not that bad. Just something to think about.
Reply With Quote Quick reply to this message
  #7  
Old 05-15-2003, 04:24 AM
Steelheader69's Avatar
Steelheader69 Steelheader69 is offline
flyfishing catarafter
 
Join Date: Nov 2001
Location: OlyPen, Chehalis System
Posts: 881
Send a message via AIM to Steelheader69 Send a message via Yahoo to Steelheader69
Yamaha, Yamaha, YAMAHA!!!!!!!

LOL. Actually, I'm in process of getting a new sled. Will probably have the 200 hp jetpump with superpump lower unit.

But for kicker, will go with the 8hp yamaha with 9hp lower unit. My Dad has this setup and is the ultimate kicker for a sled. Will kick along almost any sled up to 20' long no sweat. My Dad uses it currently on his 19' sled and is one of the nicest motors. Has electric start/tilt. MAN, I'm in LOVE with this motor. I am an old die hard evinrude guy. Love my old 9.9's. Have one with electric start. But, after seeing this Yamaha, oooooooooooooooooooooooooooooooooooooooooooooooooo o. I'm sold. The 8hp with 9hp lower unit actually is a better engine then the 9hp yamaha. My Dad bought as a fluke. Now, everyone he knows that sees his motor and tries it, has bought one. Would be great for just about any boat. I know his boat scoots right along. Extremely heavy currents he has a problem, but, you rarely use the kicker in currents like that anyways. I know the transducer put us at 20mph with that kicker. Not bad for size/weight of the boat (it's a heavy reinforced river sled).
__________________
"Good angling ethic is not a monopoly practiced just by fly fisherman" - Bill McMillan
Steelheader.net
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Looking for used outboard longrod For Sale by Owner 1 09-10-2003 08:20 PM
Outboard reference books Dble Haul Propwash 2 05-06-2003 07:32 PM
what will your next outboard be? cangoods Worldwide Flyfishing Discussion 11 06-29-2002 01:46 PM


All times are GMT -5. The time now is 08:39 PM.



Copyright Flyfishingforum.com (All Rights Reserved)