Can't center cork grip turned on blank - Fly Fishing Forum
the Rod Rack Rod Builder's Forum

 
 
Thread Tools Search this Thread Rate Thread Display Modes
Prev Previous Post   Next Post Next
  #1  
Old 04-25-2006, 11:10 PM
hnl hnl is offline
Registered User
 
Join Date: Jul 2003
Location: S.E.Florida
Posts: 81
Can't center cork grip turned on blank

I glued-up my first grip ever on a blank and when I turned it in the drill lathe the seat hood showed through on one side. Obviously the grip became offcentered somehow. The reel seat is a REC with a round hood. I epoxied in a threaded REC fighting butt insert and then used a headless bolt threaded into the insert chucked into drill lathe. I did notice a little wobble that disappeared after a while. My thought was that the fighting butt insert or the reel seat itself was not centered. The difference between the width of the edge of the cork ring arround the hood is over 1mm. I would have noticed that difference if the reel seat was off by that much.
I then glued up another cork grip on another rod. Same model seat but without the fighting butt insert. I used the bushing made for the seat and it was centered perfectly on the blank. I bushed an old blank and inserted it into the butt end of the blank I was turning and it fit perfectly. Before I started I noticed that the cork ring over the hood was symmetrical at the aft end. When I started turning the grip the same thing happened. While I was careful not to exrose the hood like the former one, it still wanted to become offset. I sanded the high spot bringing the grip back to symmetrical. After I finished the grip is great but the ring over the hood is still offset.
To produce a straight stick of cork I epoxied 60 grit paper to a smooth board and applied it carefully to knock down the high spots. I use a Flex Coat lathe with 2 steadies.
I can't figure what I am I doing wrong.
Advise would be appreciated.
Herb
Reply With Quote
 

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Connecticut is turned on.... Jimmy Stripers and Coastal Gamefish 4 10-20-2004 05:19 PM
Turned on Threaded Views sean Worldwide Flyfishing Discussion 0 06-21-2004 01:13 PM
The worm has turned Slinger >> Archive: Striper (etc) Flies 8 12-14-2003 09:04 AM


All times are GMT -5. The time now is 08:44 PM.



Copyright Flyfishingforum.com (All Rights Reserved)