Pontoon coatings? - Fly Fishing Forum
Inflatable Watercraft Rafts, pontoon boats, kickboats, etc.

Reply
 
Thread Tools Search this Thread Rate Thread Display Modes
  #1  
Old 05-18-2003, 04:27 PM
Mean Mr Mustard
Guest
 
Posts: n/a
Pontoon coatings?

Curious if anyone has any info on coatings and such which may be applied to pontoons to increase their durability, etc.

mmm
Reply With Quote Quick reply to this message
  #2  
Old 05-18-2003, 04:51 PM
Steelheader69's Avatar
Steelheader69 Steelheader69 is offline
flyfishing catarafter
 
Join Date: Nov 2001
Location: OlyPen, Chehalis System
Posts: 881
Send a message via AIM to Steelheader69 Send a message via Yahoo to Steelheader69
None needed

If you buy a good grade boat, you won't have to worry about it. Check the denier rating and the oz of material on the seams. Those will normally tell the tale. Not sure of a coating, usually they put skid pads on to help chaffing of frame. But rarely is needed. My 16' cataraft is one of the first production catarafts on the market. Now it's (I'm amazed after I did the math and figured out it's age wrong) roughly 15 years old!!!! It's still going strong, and the tubes are in excellent shape for all the use they've had (have been on some of the US's toughest whitewater runs). Never had any extra treatment nor extra skid pads.

Buy a quality set of tubes/boat you'll have no worry.
__________________
"Good angling ethic is not a monopoly practiced just by fly fisherman" - Bill McMillan
Steelheader.net
Reply With Quote Quick reply to this message
  #3  
Old 05-18-2003, 06:45 PM
Mean Mr Mustard
Guest
 
Posts: n/a
In defense of cheap, poorly constructed pontoon boats – Not everyone can afford Skookum, besides I have too many white elephants getting in the way, already.

“Hey, Pop, let’s get a canoe.” So I invest a grand in an Old Town canoe that sets in my yard, unused. Make a great planter when I finally get around to punching a few drain holes in the bottom.

I have a Sage “Noodle” spey rod (thanks, Russ), a gift from the wife. Sits in the corner, mostly unused.

The list goes on…

And I won’t even discuss yesterday’s hor$e$ - Warning! A quick trip to financial insolvency!

Nooooo, this time I wanted to start at the bottom and work up. The wife wanted to purchase a PAC 800 and I nixed the deal, preferring a full set of BFGs for the truck and a pair of “el cheapo” ODC Sport Boats (@$200 each). Worked out to about the same amount of money. The pair work just great for dragging leeches around the lake with the kid and I envision a few trips on the Skagit when the flows mellow. Nothing too extreme here…

So back to the question: Anyone have any thoughts on coatings, etc.? Any Chemical Engineers out there with ideas?

mmm
Reply With Quote Quick reply to this message
  #4  
Old 05-18-2003, 11:45 PM
Steelheader69's Avatar
Steelheader69 Steelheader69 is offline
flyfishing catarafter
 
Join Date: Nov 2001
Location: OlyPen, Chehalis System
Posts: 881
Send a message via AIM to Steelheader69 Send a message via Yahoo to Steelheader69
Wink LOL

Well, I can't really afford them either. I just have enough connections from all my years using these things I usually can buy the pieces and have frames built for WELL below most people buy a Pac9. Like I've tried to say, I've been running these things well before they were made for fishing. So I have some connections that help when it comes to custom building.

But seriously, what you can do is email ODC to see if they can get you some "swatches" of their material long and wide enough to cover the bottom like you'd want. Or, even contact other companies as well. Then, get some of the "boat glue" that can be found at whitewater outfitters. It's a glue that can be applied to a boat UNDERWATER and will setup and seal a leak. You can generously apply this to the swatch you get and put on yourself. No spray/paint coating will be better then an actual piece of material the boat is made from. (plus, not sure if they could stand the heat of a spray on coating lol). Heck, you could also get a big inner tube from a garage, and cut it and add to bottom. Know it's not fancy, but helps take some of the shock of an initial hit instead of the fabric. Use the glue I mentioned. It's GREAT stuff. Actually, you could even email Bill at Skookum and see if he'd sell you a patch. I know he adds those to his boats. Just tell him what you're doing. He's great to work with, even if you're not using his boats.
__________________
"Good angling ethic is not a monopoly practiced just by fly fisherman" - Bill McMillan
Steelheader.net
Reply With Quote Quick reply to this message
  #5  
Old 05-19-2003, 01:23 AM
Mean Mr Mustard
Guest
 
Posts: n/a
SH69,

You da man! This is the kind of stuff I'm looking for...

Do you think this boat glue would work with kevlar fabric? Does anyone, off hand, know of a source for kevlar?

mmm
Reply With Quote Quick reply to this message
  #6  
Old 05-20-2003, 12:17 AM
Steelheader69's Avatar
Steelheader69 Steelheader69 is offline
flyfishing catarafter
 
Join Date: Nov 2001
Location: OlyPen, Chehalis System
Posts: 881
Send a message via AIM to Steelheader69 Send a message via Yahoo to Steelheader69
LOL, this stuff is GOOD

Say it this way, it'll stick your hand to the boat if you wait long enough. LOL. I'm pretty sure it will. I doubt you'll need kevalar, but you never know. I'd try calling fabric shops, see if they can get you in touch with distributors. They may be able to find it for you. I bet it's probably expensive though. But this glue is great, will work on anything. I just ran out (luckily, it was for someone ELSES's boat, not mine), I lent my last tube to a buddy. But will get some more once I'm healed up enough to use my boat.

You're more then welcome for the help.
__________________
"Good angling ethic is not a monopoly practiced just by fly fisherman" - Bill McMillan
Steelheader.net
Reply With Quote Quick reply to this message
  #7  
Old 05-20-2003, 03:26 PM
Mean Mr Mustard
Guest
 
Posts: n/a
WOW - You really got the propeller spinning on top of my thinking cap. And boy do I love the web! Did a yahoo search on kevlar fabrics and found a mother lode.

I can see it now, my squished Nash Rambler of a hot rod banana boat floating down the Skagit to the oohs and awes of fellow steelheaders.

This is definitely gonna be a winter project for one of the boats.

OBTW, thanks!

mmm
Reply With Quote Quick reply to this message
  #8  
Old 06-01-2003, 12:30 AM
MJC's Avatar
MJC MJC is offline
Junkyard Spey
 
Join Date: Aug 2001
Location: Clearwater River, Peck, ID
Posts: 887
Super glue, Kevlar???

Triple M, I wouldn't think you'd need to strengthen your poontoons to run them "kiddie pools".:hehe:
Reply With Quote Quick reply to this message
  #9  
Old 06-01-2003, 02:36 PM
Mean Mr Mustard
Guest
 
Posts: n/a
Well the "kiddies" have moved from switchblades and the occasional zipgun to uzis and mac-10s.

Nah, just thinking protection in an increasing unfriendly world. Twenty or thirty years ago access was far easier to come by. Today, with most everything closed to trespass, floating is mandatory to find your few inches of space. There are some nasties out there ready to ruin your day, hence the kevlar Titanic.

The closer I get to the double nickles the more fond I become of my old hide. ...and the less immortal I feel.

mmm
Reply With Quote Quick reply to this message
  #10  
Old 01-18-2004, 01:52 PM
macspey's Avatar
macspey macspey is offline
just one more cast...
 
Join Date: Nov 2002
Location: NH/VT, NF/Labrador
Posts: 112
Progess report??

Hey MMM,
how did ya make out with your kevlar project? I'm confronting the same dilemma, nasty river with many 'foreign objects', and no lack of "kiddies" on the shore with all manner of projectiles...

Any details appreciated.-
cheers,
Macspey
Reply With Quote Quick reply to this message
  #11  
Old 01-19-2004, 04:07 PM
North Island's Avatar
North Island North Island is offline
just say no to bait
 
Join Date: Jan 2004
Location: vancouver island north
Posts: 253
Hey MMM
Instead of expensive kevlar how about cutting up your kid's crazy carpets? all kidding aside the material is cheap, readily available, and low drag
Reply With Quote Quick reply to this message
Reply

Quick Reply
Message:
Options

Register Now

In order to be able to post messages on the Fly Fishing Forum forums, you must first register.
Please enter your desired user name, your email address and other required details in the form below.
User Name:
If you do not want to register, fill this field only and the name will be used as user name for your post.
Password
Please enter a password for your user account. Note that passwords are case-sensitive.
Password:
Confirm Password:
Email Address
Please enter a valid email address for yourself.
Email Address:

Log-in

Human Verification

In order to verify that you are a human and not a spam bot, please enter the answer into the following box below based on the instructions contained in the graphic.



Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes Rate This Thread
Rate This Thread:

Posting Rules
You may post new threads
You may post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off


Similar Threads
Thread Thread Starter Forum Replies Last Post
Pontoon information RiffleFisher Getting Started 0 10-10-2004 10:35 PM
Which pontoon boat? seattlesetters Inflatable Watercraft 1 03-09-2004 05:32 PM
hotrod pontoon North Island Inflatable Watercraft 5 01-12-2004 05:53 PM
Pontoon for the Deschutes Skilly Inflatable Watercraft 5 01-12-2004 11:15 AM
Pontoon for the Deschutes Skilly Propwash 0 01-06-2004 09:36 AM


All times are GMT -5. The time now is 03:06 PM.



Copyright Flyfishingforum.com (All Rights Reserved)