Fly Fishing Forum

Fly Fishing Forum (
-   the Rod Rack (
-   -   remove name from rod? (

reely 03-07-2006 04:41 PM

remove name from rod?
Is there an easy way to remove someones name from a rod butt? It is not on top of the epoxy. Any help is appreciated.

JimW 03-07-2006 05:44 PM

If it's got epoxy over it consider putting a butt wrap over it. I wouldn't mess with removing the epoxy but there may be a way to go about it without damaging the rod.

teflon_jones 03-08-2006 07:39 AM

If it's under the epoxy there's no way to remove it without compromising the strength/durability of the rod. You'll need to cover over it.

tight-lines 03-08-2006 07:15 PM

You can try to remove the epoxy by heating it. A hair dryier works well a hardwood stick ( oak walnut) with an edge on it can be used to scrape the epxoy off and won't scratch the blank. It's not easy and if you over heat the rod you will comprimise it's integrity. Also works better on rods with a glossy finish vs. a sanded blank. NOT for the faint of heart!:eek:
If your epoxy is smooth and even or you really like the rod you might want to consider the overwraps.
good luck

All times are GMT -5. The time now is 07:38 AM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright (All Rights Reserved)