Fly Fishing Forum

Fly Fishing Forum (
-   Yak Attack (
-   -   Has anyone poled a yak? (

JWW 10-25-2003 06:27 PM

Has anyone poled a yak?
I was wondering if any yakers out there have had any success with poling their yak around? I would think that the tribalance or the flatyak would make this possible.

Penguin 10-26-2003 08:57 AM

I think the majority of folks (myself included) are not comfortable enough with the limited stability of a mono-hull yak. Dump you will.
The Kiwi Stealth twin-hull that I test paddled rescently was more than stable enough to pole but an absolute super tanker and sail...way too much mass to challenge distance and wind. I think it's much better suited to be outfitted with a trolling motor and large battery then to be paddle powered. Call me a traditionalist!

The majority of my yak experience is in the NorthEast...I tend to use it as a means to an get me to where I want to fish...
The wind is almost always a consideration and dumping is also paramont...anything not tied down is at risk and I prefer not to get wet much above the knees and on my own accord.
As the calm flat morning progresses (as it usually does), the wind typically picks up and the task of polling (much less paddling) will become complicated and frustrating. When I start encountering cruising stripes, I get out in the shallows (easy with the wide mouth Pungo) and trail the yak on a line securely clipped around my waist (sometimes short/sometimes long, depending...). Fishing as I walk until it's time to move on...LifeIsGood!

JWW 10-27-2003 09:51 PM

I have never been tot he east coast. I have been dreaming about stripers and Bluefish... Someday I will need to trade a East coast trip for a Texas trip with a flyfisherman.

Nick 10-28-2003 06:28 AM

Believe me, if there's a group to ask for help on this adventure, you've found it. From tips, technique, and tackle to places to crash (including their own), we've got it all here! Let us know when you finally get around to the eastern seaboard. Bluebird day in July with Bass on Silversides or Sandeels and you'll be asking if this is heaven!


Eddie 10-28-2003 07:24 AM

People have been poling canoes for years. Look up Gheenoe on google. Hmmmmm.

JWW 10-28-2003 06:32 PM

Thanks Nick!
Let me know if you ever plan a trip to Texas and I will give you some insider info. Here is a website that I frequent

Edited by Nick...JWW direct link to other sites are not allowed, but since this is a non commercial site, I have left the text as is.

Redit...Put the link back into effect, sorry for the confusion!

The French guy 11-21-2003 10:01 AM

I pole my yak all the time and it even has a poling plateform on it. I sight cast for Bones, permits and tarpons from my WS ride in Florida (BB and the Keys).
Being high on the water is a real advantage.

Eddie 11-21-2003 01:03 PM

I gotta see a picture, can you post one or a few?

The French guy 11-21-2003 02:31 PM

JWW 11-21-2003 07:27 PM

more info please
thanks for the pictures french guy. Your kayak rig looks awesome. What type of kayak are you using? Can you tell us how you mounted the poling platform and which components you used?

The French guy 11-21-2003 08:13 PM

I am preparing a fly fishing paper where everything will be explained.
First, if at the begining the kayak was a way to get on the flats because I could not afford a flat boat, there are now many occasions when I say no to people who invite me to go fishing with them.
The kayak is the best flat boat as long as you do not have to paddle too much. I limit my paddling to a maximum of 14 miles a day. (But I did much more).

Because I do not have any tools, I had to keep it simple and that is what saved me.
The platform is only an aquarium mount. I just cut the legs out and put a piece of plywood on top, then painted the whole thing with marine paint. It is attached with the scuba tank belts at the back and some ropes to the eyelet a the front. Just behind the seat.
The push pole I use is a swimming pool alumimum cleaning pole (16', three pieces, telescopic). I adjust the length of the pole according to the water depth. At one end, there is a loop to pole in muddy flats and on the other end a pick to pole on hard bottom and to set the boat in muddy environments.
To set the boat, I use a loop to loop connection as I have a rope attached around my wait with a loop that just fits over the loop of the push pole.
I use also the anchor to set the boat in hard bottom env. The anchor is attached to the anchor and run through a system of pulleys to the platform. there is a knot on the rope and the rope is stuck under my foot when I pole with the anchor up. Setting the boat is easy... just let the anchor go and the knot gets stuck in the pulley eyelet.

When I fish under the bridges for big tarpons, I have two anchors. A mooring one and another one (the working anchor). I use a traveler to set the anchor an the front or the rear of the yak. Once a fish is hooked, I unhook the mooring anchor (that has a bouy) and drift with the fish out of the bridge (really risky) then, once I am clear, I fight the fish and use the second anchor. This is done at night. Tricky, dangerous, but thrilling.


Eddie 11-23-2003 07:49 AM

wooooohooooo! An Everglades Sleigh Ride!
More pics please.

Pat Bahan 06-14-2004 02:35 PM

Serge What Yack Are you Poling?
I'm frustrated. :eyecrazy: I can't view your pics. I have the little boxes with red X's in them but when I try to click on them nothing happens. Don't know if its my computer or the server or what, but I can't see them. Anyway, what type of yack are you using? I don't currently have anything that stable but your report makes me think that needs to change.

The French guy 06-14-2004 02:59 PM


For some reasons direct link does not work anymore. :confused:
Provide me your email and I will send you the pictures.

JWW 06-14-2004 04:03 PM

Submit your paper to the saltwater FLyfishing mags and to Wild on the FLY. I bet a bunch of people would be interested.

All times are GMT -5. The time now is 07:19 AM.

vBulletin Security provided by vBSecurity v2.2.2 (Pro) - vBulletin Mods & Addons Copyright © 2017 DragonByte Technologies Ltd.
Copyright (All Rights Reserved)