|01-19-2005 12:21 PM|
|08-04-2004 09:37 AM|
|WVFLYMAN||Well let me be the first to say that i thank you for your research here and that i made a 12 qrt basket just recently and took it to the river just last sunday. It worked very well with me being able to shoot my entire 12 wt line from it with out a hitch. Im getting ready to leave next wendsday for Assateague Island to fish the surf so i needed this to make the long cast and didnt want to spend $60.00 for a basket. I would also like to add that Shoe Goo that you can pick up at wal-mart will also glue the tube cones in the basket as well and you can pick up a whole 10 foot joint of thin wall pvc pipe to make the tubes at Lowes for $1.46 so i guess that $2.96 for the tub $3.69 for the shoe goo and $1.46 for the pipe of which you can get alot of tubes out of (not that you need them) = $8.60 this is with tax. Sure beats the crap out $60.00 dosent it.|
|01-04-2004 10:53 PM|
"I got on Rubbermaids Webpage, I think the Rubbermaid Dishpan in question is a Model 2970, they do not list it as a 17 quart size, but rather by dimensions, 7.8" x 12.4" x 15.2",
This is not the dishpan we want. It is white in color and appeared to me to be about the size/depth of my old orvis bucket. If you cannot get the model # from your local walmart store, give me the dimensions. There are several places out here to get plastic tubs, once I get the dimensions of what I am looking for I can complete the project.
Also, I am getting the casting stroke down with the Atlantis. LC -13 cast 110' consistentanly. I KNOW who will catch the first roosterfish on it, (Walt). Look for a post from one of your computer impared west coast buddies in Feb. We are going to try the RIO Tarpon Aqualux Clear Intermediate and some RIO 30' shooters on it. Watch for our test report.
We need to do a winter clave in the Baja, with all my NorthEastern Buddies...., think about it.
Anyways, check you CND email and let me know the dimensions of the casting bucket.
Lastly, a bandsaw does a great job on the tubing, according to my partner, Bill.
|01-04-2004 08:46 PM|
Yes, us two-handed rod enthusiasts are doomed to find bigger baskets!
The one I saw had handles on each end that I planned on cutting off if they got in the way as they do add a lot of weight. I've cut and sanded down the edges without much problem as long as the material is of high quality, and Rubbermaid is.
The belt straddles the back wall of the cavity so rigidity on the sides is of no real consequence even when the turned-over lip/handle is removed.
I will get the model # next time to the store. I found them at Walmart.
|01-03-2004 12:29 PM|
After about 30 minutes playing with Google and web surfing, I think I was able to figure out what I was looking for, but still can't find someone who stocks them.
I got on Rubbermaids Webpage, I think the Rubbermaid Dishpan in question is a Model 2970, they do not list it as a 17 quart size, but rather by dimensions, 7.8" x 12.4" x 15.2", I think this is what I am looking for!
Anyways, if someone in rubbermaid land will give me the name, city or phone # of a place that sells these buggers, I'll call them and order a few!
PS. why do these "simple" projects" always seem to take longer than they should!!:eyecrazy:
|01-02-2004 11:33 PM|
Runnermaid impaired Left Coast:
OK, we started our search for the elusive 17 qt Rubbermaid Dish Pan....., Walmart, Target, Dollar Store and our local hardware store, plus calls to Longs and Raleys...., we got the plumbing supplies but Rubbermaid 17 quarters are as rare as 20# stripers on midges. Any suggestions (ie, store names) are appreciated. It's raining out here now, so I need something to do!!
PS, only 149 days til May
|01-02-2004 12:36 PM|
Juro, what about a false bottom in the pan, say a 1/2 inch, something like a plastic garage flooring material that has holes/squares in it and it's light, check it out at your local hardware store?
That way you could avoid the water knots in the basket and after fishing you can use the bucket to do dishes with wifey?
Can't wait to see mine!
|01-02-2004 08:52 AM|
Drainage holes are a double-edged sword. You don't want water to come in, but you want water to get out. Water in the tub introduces agitation; any turbulence and the running line is tied in knots.
When a person is standing high above the waterline holes are convenient, when a person is wading or near waves they are a pain.
Since it's easier to drain the tub than to untie line knots, I never put holes in my stripping baskets.
I have a solution that is the best of both worlds but can not discuss it at this time
|01-02-2004 05:05 AM|
Do you put drainage holes in your stripping basket?
|01-02-2004 12:24 AM|
You got it!
I use a thinwall pvc and cut it across at the base of the ellipse. When using 8, they are all symmetric although I wondered about different heights.
The pattern is as follows:
- instead of gluing them in square to the shape of the tub, rotate the pattern to make a diamond shape
- add one more in each corner, slopes of the frustums facing upward and in to guide the shooting line to the center while guiding the dropping stripped line to the edge
|01-01-2004 04:59 PM|
"frustums of cylinders are easy, cheap and very effective for the purpose "
You mentioned that you used 8 cylinders in the 17qt bucket. Did you cut the lenght of these down or are they pretty much one standard lenght?
Happy New Year,
|11-20-2003 04:23 PM|
Make me a stripping basket and that way I can add to my inventory of "left at the Cape" stuff!
Of course the Logo is "de rigueur"
Just let me know the cost, as you know, I'm in no rush for it so this will give you lots of tiem to get it ready. I'll even accept it as a prototype as yet to be field tested by an international client!
|11-20-2003 02:01 PM|
Was at Fred Meyer last night (do you guys have those back east?) and pick up a product by Loctite called Xtreme repair adhesive and tried it out last night. It is flexible goop that looks like it is going to work. Can pick up the tub and shake it around by the frustum and it aint coming loose. Only cost $3.99 for a tube of it but I will warn you it is pretty noxious...
Now where can I get a CND sticker....
|11-11-2003 09:19 AM|
|juro||No, will still do that. In fact I'll do it this week...|
|11-11-2003 08:22 AM|
does this mean you're not placing the "cone order" we talked about??
|This thread has more than 15 replies. Click here to review the whole thread.|