|07-18-2010 09:34 AM|
If the anchor gets hung up, a strong pull from above will break the zip tie and then you'll (hopefully) be able to free it, now pulling from the rear eye.
I cheaped out and bought the "high tensile steel" $7.99 version. It's uglier than a plugged toilet. (Compared to the polished stainless steel version, anyway.)
|06-27-2010 02:02 PM|
You can get the not-nearly-so-pretty galvanized version from West Marine for $7.99! (Vs. $73 for the polished stainless steel version) http://www.westmarine.com/webapp/wcs...4&ci_sku=45443
Funny... on further research, it turns out Lewmar's Bruce "claw" design, although very popular, may be the least effective of anchor types.
All I know is that I could not pull the little anchor through the sand (horizontal pull; lots of scope in the rode) and the thing is pretty. That has to count for something, right?
|06-27-2010 01:45 PM|
Penguin gave me the demo as well. I'm going to get one for my Gloucester light dory once built in early July.
How is the release activated? Do you run a second line to the bend eye?
|06-27-2010 10:47 AM|
You can get a galvanized one really cheap, like $9, I use a slightly bigger one for my boat and I concur, it works great.
|06-26-2010 11:07 AM|
Form and function
When I was on the Cape earlier this month, I had the opportunity to do some kayaking/fishing with Penguin and Rooster. They both had the most beautiful and effective anchors I'd ever seen for use in the sand; the Lewmar Stainless Steel Horizon Claw in 2.2 lb. size.
It's pricey, but this gracefully curved and perfectly polished piece is pretty enough to display on your mantel during the off season!
When we achored the 'yaks to a bar and got out to cast, there were no worries about them pulling loose and drifting away while we were concentrating on the fishing.
I was smitten with this anchor and will never be able to look my cheap, folding grapnel anchor straight in the eye again....