|09-22-2007 12:13 PM|
I just returned from a drift down the Thompson River and ran plenty of big Class II water in my 8' 6" Waterskeeter. Didn't even get my upper body wet.
|06-29-2007 06:04 PM|
contact the manuf for specs but I can offer one pc of advice - don't anchor in a river from a pontoon
still water, slack water is fine but don't try it in a current
#1 - the anchor can't be pulled from the pontoon, not enough leverage
#2 - if the current is more than estimated and the rope can not be free the pontoon can get swamped
#3 - you will be held downcurrent under tension and the anchor may be locked in an unstream crack so the only chance you have is to row up and pull while the current pulls you back down tightening again, a small window
If you do decide to try it go with a buddy so they can help you get out of a bind
I have rowed a bucks bag in up to Class III for years and never anchor in current after the first couple of learning experiences.
|06-29-2007 05:32 PM|
What size anchor and rope?
I just purchased a Creek Company ODC 915 personal pontoon. It comes with an anchor system, but no rope or anchor. My questions are what diameter and type of rope is needed, and what sized anchor I should purchase. It will mainly be used on the Colorado river near Statebridge in Colorado, and the Eagle river below the town of Eagle.